Hologram project

March 14, 2016
Is This Star Wars-Style

Alex Kipman.It’s the end of October, when the days have already grown short in Redmond, Washington, and gray sheets of rain are just beginning to let up. In several months, Microsoft will unveil its most ambitious undertaking in years, a head-mounted holographic computer called Project HoloLens. But at this point, even most people at Microsoft have never heard of it. I walk through the large atrium of Microsoft’s Studio C to meet its chief inventor, Alex Kipman.

The headset is still a prototype being developed under the codename Project Baraboo, or sometimes just “B.” Kipman, with shoulder-length hair and severely cropped bangs, is a nervous inventor, shifting from one red Converse All-Star to the other. Nervous, because he’s been working on this pair of holographic goggles for five years. No, even longer. Seven years, if you go back to the idea he first pitched to Microsoft, which became Kinect. When the motion-sensing Xbox accessory was released, just in time for the 2010 holidays, it became the fastest-selling consumer gaming device of all time.
Right from the start, he makes it clear that Baraboo will make Kinect seem minor league.

Kipman leads me into a briefing room with a drop-down screen, plush couches, and a corner bar stocked with wine and soda (we abstain). He sits beside me, then stands, paces a bit, then sits down again. His wind-up is long. He gives me an abbreviated history of computing, speaking in complete paragraphs, with bushy, expressive eyebrows and saucer eyes that expand as he talks. The next era of computing, he explains, won’t be about that original digital universe. “It’s about the analog universe, ” he says. “And the analog universe has a fundamentally different rule set.”

Translation: you used to compute on a screen, entering commands on a keyboard. Cyberspace was somewhere else. Computers responded to programs that detailed explicit commands. In the very near future, you’ll compute in the physical world, using voice and gesture to summon data and layer it atop physical objects. Computer programs will be able to digest so much data that they’ll be able to handle far more complex and nuanced situations. Cyberspace will be all around you.

What will this look like? Well, holograms.

First Impressions

That’s when I get my first look at Baraboo. Kipman cues a concept video in which a young woman wearing the slate gray headset moves through a series of scenarios, from collaborating with coworkers on a conference call to soaring, Oculus-style, over the Golden Gate Bridge. I watch the video, while Kipman watches me watch the video, while Microsoft’s public relations executives watch Kipman watch me watch the video. And the video is cool, but I’ve seen too much sci-fi for any of it to feel believable yet. I want to get my hands on the actual device. So Kipman pulls a box onto the couch. Gingerly, he lifts out a headset. “First toy of the day to show you, ” he says, passing it to me to hold. “This is the actual industrial design.”

jpeg-3-fullOh Baraboo! It’s bigger and more substantial than Google Glass, but far less boxy than the Oculus Rift. If I were a betting woman, I’d say it probably looks something like the goggles made by Magic Leap, the mysterious Google-backed augmented reality startup that has 2 million in funding. But Magic Leap is not yet ready to unveil its device. Microsoft, on the other hand, plans to get Project HoloLens into the hands of developers by the spring. (For more about Microsoft and CEO Satya Nadella’s plans for Project HoloLens, read WIRED’s February cover story.)

Kipman’s prototype is amazing. It amplifies the special powers that Kinect introduced, using a small fraction of the energy. The depth camera has a field of vision that spans 120 by 120 degrees—far more than the original Kinect—so it can sense what your hands are doing even when they are nearly outstretched. Sensors flood the device with terabytes of data every second, all managed with an onboard CPU, GPU and first-of-its-kind HPU (holographic processing unit). Yet, Kipman points out, the computer doesn’t grow hot on your head, because the warm air is vented out through the sides. On the right side, buttons allow you to adjust the volume and to control the contrast of the hologram.

Tricking Your Brain

Project HoloLens’ key achievement—realistic holograms—works by tricking your brain into seeing light as matter. “Ultimately, you know, you perceive the world because of light, ” Kipman explains. “If I could magically turn the debugger on, we’d see photons bouncing throughout this world. Eventually they hit the back of your eyes, and through that, you reason about what the world is. You essentially hallucinate the world, or you see what your mind wants you to see.”

To create Project HoloLens’ images, light particles bounce around millions of times in the so-called light engine of the device. Then the photons enter the goggles’ two lenses, where they ricochet between layers of blue, green and red glass before they reach the back of your eye. “When you get the light to be at the exact angle, ” Kipman tells me, “that’s where all the magic comes in.”

Thirty minutes later, after we’ve looked at another prototype and some more concept videos and talked about the importance of developers (you always have to talk about the importance of developers when launching a new product these days), I get to sample that magic. Kipman walks me across a courtyard and through the side door of a building that houses a secret basement lab. Each of the rooms has been outfitted as a scenario to test Project HoloLens.

A Quick Trip to Mars

The first is deceptively simple. I enter a makeshift living room, where wires jut from a hole in the wall where there should be a lightswitch. Tools are strewn on the West Elm sideboard just below it. Kipman hands me a HoloLens prototype and tells me to install the switch. After I put on the headset, an electrician pops up on a screen that floats directly in front of me. With a quick hand gesture I’m able to anchor the screen just to the left of the wires. The electrician is able to see exactly what I’m seeing. He draws a holographic circle around the voltage tester on the sideboard and instructs me to use it to check whether the wires are live. Once we establish that they aren’t, he walks me through the process of installing the switch, coaching me by sketching holographic arrows and diagrams on the wall in front of me. Five minutes later, I flip a switch, and the living room light turns on.

Another scenario lands me on a virtual Mars-scape. Kipman developed it in close collaboration with NASA rocket scientist Jeff Norris, who spent much of the first half of 2014 flying back and forth between Seattle and his Southern California home to help develop the scenario. With a quick upward gesture, I toggle from computer screens that monitor the Curiosity rover’s progress across the planet’s surface to the virtual experience of being on the planet. The ground is a parched, dusty sandstone, and so realistic that as I take a step, my legs begin to quiver. They don’t trust what my eyes are showing them. Behind me, the rover towers seven feet tall, its metal arm reaching out from its body like a tentacle. The sun shines brightly over the rover, creating short black shadows on the ground beneath its legs.

Source: www.wired.com
Hologram Project - Preproducción, 1er Cap (Preview)
Hologram Project - Preproducción, 1er Cap (Preview)
4D Hologram Project Video - Hatsune Miku
4D Hologram Project Video - Hatsune Miku
Pyramid hologram final project
Pyramid hologram final project
Share this Post